Heat Recovery Units Manufacturer

Hizmetlerimiz

  1. Home page
  2. Services
  3. Heat Recovery Units Manufacturer

Heat Recovery Units Manufacturer

DUCT TYPE SHELTER POWER PLANT (DUCT TYPE SHELTER POWER PLANT)
Channel-type shelter stations are designed to be mounted on the ceiling. The body of the power plant is manufactured from a 1 mm thick galvanized sheet. The blowing fan is manufactured from galvanized sheet metal by using an external rotor motor. In addition, the fan is statically and dynamically balanced. There is a G4 or F7 cassette filter as a pre-filter, an active carbon filter, and a radioactive HEPA filter for use in dangerous times. Optionally, a lead separator can be added, and the inner walls can be covered with a lead plate.
System operation; It starts with the activation of the fan, normally the filter damper is in the closed position and the bypass damper is open, so the fresh air sucked from outside passes through the cassette filter and is pressed inside. In dangerous times, the bypass damper is closed and the filter damper is open. The sucked fresh air passes through the cassette filter, active carbon filter, and HEPA filter and is pressed in. The air damper to be adjusted is made by a single arm. When the arm is turned, the bypass damper opens and the danger damper closes. When the arm is reversed, the opposite of this process is done.

DOUBLE FUNCTION SHELTER PLANT
Power plant casing is manufactured from aluminum profiles, while the body is covered with 0.8 mm galvanized sheet inside and 0.8 mm painted sheet outside. Body panels are filled with 25 mm thick polyurethane.
The blowing fan is double suction, high pressure, and belt-pulley type. The electric motor can be used as a single-phase or three-phase optionally.
In the plant, there is a G4 or F7 cassette filter as a pre-filter, an active carbon filter, and a radioactive HEPA filter for use in dangerous times. Optionally, a lead separator can be added, and the inner walls can be covered with a lead plate.
System operation; It starts with the activation of the fan, in normal time the filter damper is in the closed position, and at the normal time damper is in the open position, so the fresh air sucked from outside passes through the cassette filter and is pressed inside. If it is in danger time, the normal time damper should be closed and the filter damper open. The sucked fresh air passes through the active carbon filter, HEPA filter, and cassette filter and is pressed in.
The air damper to be adjusted is made by means of two arms. In the time of danger, the hazard damper arm is switched to the open position, the normal time damper is kept in the closed position. In normal time, the normal time damper should be kept in the open position and the danger damper in the closed position.

Contact

  • Saraylar Mahallesi 1. Sanayi Sitesi 155 Sokak No: 23 Merkez / DENİZLİ

  • Head Office

    General Manager : Mehmet İlkay İlgen
    Gsm : +90 532 678 6434
    mehmet@proktes.com

  • Sales And Logistics

    Sales Director : Meysam Siyadehi
    Gsm : +90 552 778 3778
    sales@havalan.com.tr

Where are we?

2024 PROKTES PROJE KONSTRÜKSİYON TESİSAT DOĞALGAZ İNŞ.SAN.TİC.LTD.ŞTİ. Haşem Bilgi Teknolojileri Pazarlama Ve Ticaret Ltd. Şti.